The power mechanism sets the FAMCO Air Shear apart; two deliver the full rated capacity. Features FAMCO quality construction, including all-steel, box-type bed and members for rugged, rigid support. Installations fast and easy; simply connect the air line and wire the solenoid valve to any 115 volt AC control panel.

Available in 12GA; 14GA; 16GA. Capacities in mild steel and up to 1/4″ ABS Plastic, in 24″ to 84″ cutting widths.

“P-100B” Series feature an anti-friction clutch and brake. The orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. This 360′ engagement clutch provides instantaneous, accurate shear operation – assuring the consistent repetition essential to effective cut-to-length lines and feed operations of all kinds.

Available in 14 GA; 16GA; 18GA capacities in mild steel and up to 1/4″ ABS Plastic, in 24″ to 72″ cutting widths.

“P-WG” Series transmissions feature a silent worm gear, with an anti-friction clutch and brake. The worm is part of the one-piece clutch shaft to insure true rigidity. Worm and gear rotate only during the cutting stroke – a fraction of the total operation time of the shear. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. The gear box with a 15 to 1 ratio offers smooth operation with high torque capability.

Available in 10GA; 12GA and 14 GA in mild steel and up to 3/8″ ABS plastic in 24″ to 10 ft cutting widths.

“PC” Series Shears are equipped with a compact, low-inertia, high-torque pneumatic friction clutch and brake. These trouble-free units never need adjusting, as they self-compensate for wear. This 360′ engagement clutch provides instantaneous, accurate shear operation – assuring the consistent repetition essential to effective cut-to-length lines and continuous feed operations of all kinds.

The most modern design is incorporated in this rugged, big capacity series of FAMCO squaring shears. Whether cutting to capacity or very light gauge material, each cut is square and accurate. Fast air clutch engagement makes the shear in this series ideal for high production.

High Speed 10 gauge cut-to-length line shear. Air clutch, air brake, DC control circuitry and 250 stroke per minute operation makes this shear ideal for high production, accurate shearing. Also available in 10 gauge 80″ wide, 3/16″-72″ wide, and 1/4″-52″ wide capacities. Passline height is 42″ shown.

8 additional models available in FLAT BACK DESIGN 10 and 14 gauge, 60″ – 72″ cutting length including (4) straight upper knife models and (4) bowtie-reversed upper knife models. See pages 13 and 14 for detail engineering data.

• 8 additional models available – *10 and 14 Gauge 60″ – 72″ Cutting Length
• (4) Straight Upper Knife Models (4) Bowtie – Reversed Upper Knife Models

The power transfer mechanism sets the FAMCO Air Shear apart; two powerful air cylinders connected to a common steel torque tube deliver the full rated capacity. Solenoid air valve is quickly actuated by convenient movable foot switch. Features FAMCO quality construction, including all-steel, box-type bed and end members for rugged, rigid support. Installation is fast and easy: simply connect the air line and plug the solenoid valve to any 115 volt AC outlet. Available in 12GA; 14GA; and 16GA capacity, in cutting widths from 24″ to 84″.

These shears incorporate two heavy duty air cylinders, 4″ bore X 5″ stroke. They provide simplicity and higher production capability, along with ease of operation, through a foot air valve. 16GA capacity in 36″ & 52″ widths.

Efficient performance makes this 190-strokes-per-minute model the ideal choice for any operation within the stated capacity. In every-day use or cut-to-length lines of lighter materials,these shears offer the versatility of the solenoid operated clutch and the quality construction found in every FAMCO power shear. B Series shears feature an anti-friction clutch and brake. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. This 360 degree engagement clutch provides instantaneous, accurate shear operation assuring the consistent repetition essential to effective cut-to-length lines and feed operations of all kinds. Available in 18GA; 16GA; and 14GA. capacities, in cutting widths from 24″ to 72″.

“WG” Series Transmissions feature a silent worm gear, with an anti-friction clutch and brake. The worm is part of the one-piece clutch shaft for insure true rigidity. Worm and gear rotate only during the cutting stroke – a fraction of the total operation time of the shear. High torque pneumatic friction clutch and brake are trouble-free units.

The most modern design is incorporated in this rugged, big capacity series of FAMCO squaring shears. Whether cutting to capacity or very light gauge material, each cut is square and accurate. Fast air clutch engagements and movable guarded foot-switch control make the shears in this series ideal for high production use. Available in 10GA;3/16″ & 1/4″ capacities, in cutting widths from 36″ to 12ft.

The most modern design is incorporated in this rugged, big capacity series of FAMCO squaring shears. Whether cutting to capacity or very light gauge material, each cut is square and accurate. Fast air clutch engagements and movable guarded foot-switch control make the shears in this series ideal for high production use. Available in 3/8″ capacity, in 4ft to 12ft cutting widths.

Designed for day after day cutting of all kinds of material; these rugged, powerful shears, transfer power through two heavy duty hydraulic cylinders connected to a common steel torque tube. Solenoid operated four way hydraulic valve is quickly actuated by convenient movable foot switch. These shears feature FAMCO quality, all steel construction and heavy duty hydraulic power units. Installation is fast and easy; simply provide electrical power and you are ready for production. Precise stroke control is provided through a limit switch adjustment. Available in 14GA; 10GA; 1/4″ & 3/8″ capacities; in 48″ to 12ft cutting widths.

These versatile, compact, low cost hydraulic shears are equipped complete with 3 H.P. motor, self-contained hydraulic power unit, motor starter, electric solenoid valve, foot switch, stroke control, and heavy duty hydraulic cylinders.16GA. capacity in 36″ & 52″ cutting widths.

These versatile, rugged, foot shears offer the added features of slitting and notching. The 18″ gap permits slitting a sheet of any length, by successive cuts. Slitling gauge, back gauge, front and side gauge are standard, along with manually actuated cam holddown and finger guard. Available in 16GA, capacity; in 36″ & 52″ cutting widths.

Standard equipment

• Tool steel blades.
• Gauges: front, back and side.
• 16 Gauge capacity.
• 36″ & 52″ cutting widths
• Holddown, spring loaded.
• Lexan, finger guard.
• Support brackets.
• T-slots and hand slot.

If your problem is a special one-shearing a material that you now feel must be cut by other means, fitting a shearing operation to a new process, developing a shear specifically designed to cut a new material-FAMCO is eager to offer a solution. FAMCO engineers have the experience and know how to design and produce a shear that will do an efficient job for you, whether the answer lies in a minor revision of an existing model or involves a whole new concept of shearing. Your problem may be solved by a special blade opening, crosshead slope or stroke. It may require a special speed, a different holddown device, or a new electrical circuit. Perhaps a special grinding of blades-even special corrugated blades-will make your operation more efficient and profitable. Whatever your question, consult the acknowledged leader in the field of special shears, and let FAMCO advise you.

High Speed 10 gauge 60″ wide cut-to-length line shear. Air clutch, air-brake, DC control circuitry and 250 stroke per minute operation make this shear ideal for high production, accurate shearing.

Available in 16 gauge through 3/8 capacity, and 24″ through 12 foot wide.

Special Gap Type Shear for plastic cut-to-length line. Purpose of gap construction is to allow shear to move in and out of extrusion line without disturbing material flow and to facilitate initial threading of line. Shear cycles on stroke in less than one second with explosion-proof electricals.